Publications

Publications within Machine and Process Technology

[1]
C. Frangoudis et al., "Experimental analysis of the CNx nano-damping material’s effect on the dynamic performance of a milling process," in Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies, 2013, pp. 293-302.
[2]
S. Pervaiz et al., "A coupled FE and CFD approach to predict the cutting tool temperature profile in machining," Procedia CIRP, vol. 17, pp. 750-754, 2014.
[3]
A. Archenti and C. M. Nicolescu, "Accuracy analysis of machine tools using Elastically Linked Systems," CIRP annals, vol. 62, no. 1, pp. 503-506, 2013.
[4]
T. Österlind, "An Analysis of Machining System Capability and Its Link with Machined Component Quality," Licentiate thesis Stockholm : KTH Royal Institute of Technology, Trita-IIP, 13:03, 2013.
[5]
A. Archenti, L. Daghini and T. Österlind, "Contactless excitation and response system for analysis of high precision rotor dynamic properties," in Laser Metrology and Machine Performance X : LAMDAMAP 2013, 2013, pp. 150-156.
[6]
C. Frangoudis, C.-M. Nicolescu and A. Rashid, "Experimental Analysis of a Machining System with Adaptive Dynamic Stiffness," Journal of Machine Engineering, vol. 13, no. 1, pp. 49-63, 2013.
[7]
L. Daghini, A. Archenti and T. Österlind, "Extending stability limits by designed-in damping," Journal of Machine Engineering, vol. 13, no. 1, pp. 37-48, 2013.
[8]
L. Daghini and A. Berglund, "Impact Acoustic Testing as NDT Method for Classification of Compacted Graphite Iron," in Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies, 2013, pp. 293-302.
[9]
S. W. Raza, S. Pervaiz and I. Deiab, "Tool wear patterns when turning of titanium alloy using sustainable lubrication strategies," International Journal of Precision Engineering and Manufacturing, vol. 15, no. 9, pp. 1979-1985, 2014.
[10]
Q. FU, A. Rashid and C. M. Nicolescu, "Improving machining performance against regenerative tool chatter through adaptive normal pressure at the tool clamping interface," Journal of Machine Engineering, vol. 13, no. 1, pp. 93-105, 2013.
[11]
V. Nayyar et al., "Investigation of microstructure and material properties for 18 different graphitic cast iron model materials with focus on Compacted Graphite Iron (CGI)," International Journal of Microstructure and Materials Properties, vol. 8, no. 4/5, pp. 262-282, 2013.
[12]
Q. Fu, D. Lundin and C. M. Nicolescu, "Anti-vibration Engineering in Internal Turning Using a Carbon Nanocomposite Damping Coating Produced by PECVD Process," Journal of materials engineering and performance (Print), vol. 23, no. 2, pp. 506-517, 2014.
[13]
S. Pervaiz et al., "Experimental and numerical investigation of Ti6A14V alloy machinability using TiAIN coated tools," in Transactions of the North American Manufacturing Research Institution of SME, 2014, pp. 104-113.
[14]
F. M. Abdullah Asif, "Information requirements and management for service based business models," in Swedish Production Symposium, 2014.
[15]
T. F. Adane and M. Nicolescu, "System dynamics analysis of energy usage: Case studies in automotive manufacturing," International Journal of Manufacturing Research, vol. 9, no. 2, pp. 131-156, 2014.
[16]
T. Österlind, C. Frangoudis and A. Archenti, "Operational Modal Analysis During Milling Of Workpiece, Fixed On A Stiffness Controllable Joint," Journal of Machine Engineering, vol. 13, no. 2, pp. 69-78, 2013.
[17]
A. Archenti et al., "A new method for circular testing of machine tools under loaded condition," in Fifth CIRP Conference On High Performance Cutting 2012, 2012, pp. 575-580.
[18]
C. Frangoudis, "Controlling the dynamic characteristics of machining systems through consciously designed joint interfaces," Licentiate thesis Stockholm : KTH Royal Institute of Technology, TRITA-IIP, 14:07, 2014.
[19]
M. Werke, M. Hedlind and M. Nicolescu, "Geometric Distortion Analysis Using CAD/CAM Based Manufacturing Simulation," in Proceedings of the 6th International Swedish Production Symposium, 2014.
[20]
S. Pervaiz, "Investigation Cooling and Lubrication Strategies for Sustainable Machining of Titanium Alloys," Licentiate thesis Stockholm : KTH Royal Institute of Technology, TRITA-IIP, 14:02, 2014.
[21]
Q. Fu, "Joint Interface Effects on Machining System Vibration," Licentiate thesis Stockholm : KTH Royal Institute of Technology, TRITA-IIP, 13:05, 2013.
[24]
T. F. Adane et al., "Performance evaluation of machining strategy for engine-block manufacturing," Performance evaluation of machining strategy for engine-block manufacturing, vol. 15, no. 4, pp. 81-102, 2015.
[25]
N. A. Theissen, T. Laspas and A. Archenti, "Closed-force-loop elastostatic calibration of serial articulated robots," Robotics and Computer-Integrated Manufacturing, vol. 57, pp. 86-91, 2019.
[26]
G. W. Vogl, A. Archenti and M. A. Donmez, "Identification of machine tools linear axes performance using on-machine embedded inertia measurement units," in Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017, 2017, pp. 65-74.
[27]
T. Adane and M. Nicolescu, "Towards a Generic Framework for the Performance Evaluation of Manufacturing Strategy: An Innovative Approach," Towards a Generic Framework for the Performance Evaluation of Manufacturing Strategy: An Innovative Approach, vol. 9, no. 2, pp. 131-156, 2018.
[28]
T. Österlind, L. Daghini and A. Archenti, "Evaluation of tool steel alloy performance in a milling operation through operational dynamic parameters," International journal of machine tools & manufacture, vol. 114, pp. 54-59, 2017.
[30]
Q. Fu et al., "Suppressing tool chatter with novel multi-layered nanostructures of carbon based composite coatings," Journal of Materials Processing Technology, vol. 223, pp. 292-298, 2015.
[31]
T. Laspas, "Closed Force Loop Evaluation of Machining Systems," Licentiate thesis Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2018:19, 2018.
[32]
T. F. Adane, "Manufacturing Dynamics and Performance Evaluation," Doctoral thesis Stockholm : Kungliga Tekniska högskolan, TRITA-ITM-AVL, 2018:33, 2018.
[33]
F. M. A Asif, "Circular Manufacturing Systems : A development framework with analysis methods and tools for implementation," Doctoral thesis : KTH Royal Institute of Technology, TRITA-IIP, 05, 2017.
[34]
S. Pervaiz et al., "A novel numerical modeling approach to determine the temperature distribution in the cutting tool using conjugate heat transfer (CHT) analysis," The International Journal of Advanced Manufacturing Technology, vol. 80, no. 5, pp. 1039-1047, 2015.
[35]
M. Werke, "Principles for modelling of manufacturing sequences," Doctoral thesis Stockholm : KTH Royal Institute of Technology, 2015.
[36]
F. M. Abdullah Asif et al., "System dynamics models for decision making in product multiple lifecycles," Resources, Conservation and Recycling, vol. 101, pp. 20-33, 2015.
[37]
F. M. Abdullah Asif et al., "A practical ICT framework for transition to circular manufacturing systems," in Procedia CIRP, 2018, pp. 598-602.
[39]
Y. Wang et al., "Research on Development Mechanism of "Family Farm" under E-commerce," in 2018 INTERNATIONAL CONFERENCE ON E-COMMERCE AND CONTEMPORARY ECONOMIC DEVELOPMENT (ECED 2018), 2018, pp. 1-12.
[40]
T. Österlind, "Estimation of Machining System Dynamic Properties - Measurement and Modelling," Doctoral thesis Stockholm : Kungliga Tekniska högskolan, TRITA-IIP, 17-02, 2017.
[41]
T. F. Adane and M. Nicolescu, "System dynamics as a decision support system for machine tool selection," Journal of Machine Engineering, vol. 16, no. 3, pp. 102-125, 2016.
[42]
S. Pervaiz et al., "Prediction of energy consumption and environmental implications for turning operation using finite element analysis," Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture, vol. 229, no. 11, 2015.
[43]
T. Österlind, L. Kari and C.-M. Nicolescu, "Analysis of stationary displacement patterns in rotating machinery subject to local harmonic excitation," Journal of Sound and Vibration, vol. 389, pp. 224-235, 2017.
[45]
M. Leonesio, A. Archenti and P. Parenti, "Parametric and non-parametric identification of micromilling dynamics," in Proceedings of the 4M/ICOMM2015 Conference, 2015, pp. 121-125.
[46]
K. Szipka et al., "Identification of machine tool squareness errors via inertial measurements," CIRP annals, vol. 68, no. 1, pp. 547-550, 2019.
[47]
T. F. Adane et al., "Application of system dynamics for analysis of performance of manufacturing systems," Journal of manufacturing systems, vol. 53, pp. 212-233, 2019.
[48]
X. Zhao, A. Rashid and S. Dadbakhsh, "Influence of Contouring and depth of machining on tensile properties of Inconel 625 made by Electron Beam Melting," in Metal Additive Manufacturing Conference : Laser Melting, Electon Beam Melting & Direct Energy Deposition Processes, 2019, pp. 118-127.
[49]
X. Zhao, A. Rashid and S. Dadbakhsh, "Influence of Contouring and depth of machining on tensile properties of Inconel 625 made by Electron Beam Melting," in Metal Additive Manufacturing Conference : Laser Melting, Electon Beam Melting & Direct Energy Deposition Processes, 2019, pp. 118-127.
[50]
G. W. Vogl et al., "Root-cause analysis of wear-induced error motion changes of machine tool linear axes," International journal of machine tools & manufacture, vol. 143, pp. 38-48, 2019.

Publications within Metrology and Optics

[1]
R. Lindqvist et al., "An information-model approach for systematic and holistic geometrical inspection and control planning (GICP)," Journal of the CMSC, vol. 4, no. 2, pp. 20-26, 2009.
[2]
S. S. Dimov et al., "4M Network of Excellence, Progress report 2009," in 4M/ICOMM 2009 : The Global Conference on Micro Manufacture, 2009.
[3]
L. Mattsson, V. Schulze and J. Schneider, "Quality assurance and metrology," in Ceramic Processing in Microtechnology, H-J Ritzhaupt-Kleissl, P. Johander Ed., Dunbeath : Whittles Publishing, 2009, pp. 305-325.
[4]
C. Hyll, H. Vomhoff and L. Mattsson, "Directional emittance of dry and moist paper," Nordic Pulp & Paper Research Journal, vol. 29, no. 2, pp. 294-303, 2014.
[5]
B. Daemi and L. Mattsson, "Performance Evaluation of Laser Micro-Machining Installations," in Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, 2013, pp. 114-117.
[6]
N. H. Abramson, "INSTANT RANDOM INFORMATION," in SEARCH FOR FUNDAMENTAL THEORY, 2010, pp. 113-117.
[9]
P. Ekberg, L. Stiblert and L. Mattsson, "Z-correction, a method for achieving ultraprecise self-calibration on large area coordinate measurement machines for photomasks," Measurement science and technology, vol. 25, no. 5, pp. 055002, 2014.
[10]
P. L. Tam et al., "A study of the surface integrity after machining by means of non-destructive testing methods," in Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies Vol. 2, 2013, pp. 283-292.
[11]
L. P. Ekberg, "Development of ultra-precision tools for metrology and lithography of large area photomasks and high definition displays," Doctoral thesis Stockholm : KTH Royal Institute of Technology, Trita-IIP, 13:04, 2013.
[12]
P. Ekberg, "Development of a state-of-the-art nm-measurement system for square meter sized lithography masks," in Proceedings of the 12th euspen International Conference 2012, 2012, pp. 57-62.
[13]
C. Hyll, H. Vomhoff and L. Mattsson, "A method for measurement of the directional emittance of paper in the infrared wavelength range," Nordic Pulp & Paper Research Journal, vol. 27, no. 5, pp. 958-967, 2012.
[14]
C. Hyll, H. Vomhoff and M. Nygårds, "Analysis of the plastic and elastic energy during the deformation and rupture of a paper sample using thermography," Nordic Pulp & Paper Research Journal, vol. 27, no. 2, pp. 329-334, 2012.
[15]
R. Su, "Assessment of optical coherence tomography for metrology applications in high-scattering ceramic materials," Licentiate thesis Stockholm : KTH Royal Institute of Technology, Trita-IIP, 2012:07, 2012.
[16]
C. Hyll, H. Vomhoff and L. Mattsson, "Directional emittance of dry and moist paper," , Innventia Report, 362, 2012.
[17]
R. Su and L. Mattsson, "Evaluation of optical inspection methods for non-destructive assessment of embedded microstructures and defects in ceramic materials," in Proceedings of the 9th International Conference on Multi-Material Micro Manufacture, 2012, pp. 109-112.
[18]
P. Ekberg and A. Von Sydow, "Past and future challenges from a display mask writer perspective," in Photomask and Next-Generation Lithography Mask Technology XIX, 2012, p. 84410N.
[19]
N. Abramson, "FEMTOSECOND IMAGING Motion picture of short pulses," Nature Photonics, vol. 5, no. 7, pp. 389-390, 2011.
[20]
N. H. Abramson, "Appearance of Objects at Relativistic Velocities, a Holographic Approach," in SEARCH FOR FUNDAMENTAL THEORY, 2010, pp. 118-124.
[21]
Y. Li et al., "Model based in-process monitoring with optical coherence tomography," in Procedia CIRP : 1st CIRP Global Web Conference: Interdisciplinary Research in Production Engineering (CIRPE2012),, 2012, pp. 70-73.
[22]
B. Daemi, "Image analysis for precision metrology : Verifacition of micro machining systems and aerodynamic surfaces," Licentiate thesis Stockholm : KTH Royal Institute of Technology, TRITA-IIP, 14:06, 2014.
[23]
P. Ekberg, L. Stiblert and L. Mattsson, "A new general approach for solving the self-calibration problem on large area 2D ultra-precision coordinate measurement machines," Measurement science and technology, vol. 25, no. 5, pp. 055001, 2014.
[24]
P. Ekberg, "Z-correction, a method for achieving ultra-high absolute pattern placement accuracy of large area photomasks," in Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2013, 2013, pp. 253-256.
[25]
P. Ekberg, L. Stiblert and L. Mattsson, "A Large-area ultra-precision 2D geometrical measurement technique based on statistical random phase detection," Measurement science and technology, vol. 23, no. 3, 2012.
[26]
C. Hyll, "Infrared Emittance of Paper : Method Development, Measurements and Application," Licentiate thesis Stockholm : KTH Royal Institute of Technology, Trita-IIP, 12:10, 2012.
[28]
R. Su et al., "Optical coherence tomography for quality assessment of embedded microchannels in alumina ceramic," Optics Express, vol. 20, no. 4, pp. 4603-4618, 2012.
[29]
B. Daemi and L. Mattsson, "Optical measurement of waviness on specular surfaces by Fringe Reflection Technique, FRT," in Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, 2012, pp. 117-120.
[30]
R. Lindqvist, "Geometrical and dimensional Measurement Planning : - a systematic and holistic approach," Licentiate thesis Stockholm : KTH Royal Institute of Technology, Trita-IIP, 2011.
[31]
R. Su et al., "Optical coherence tomography : a potential tool for roughness assessment of free and embedded surfaces of laser-machined alumina ceramic," in Proceedings of the 8th International Conference on Multi-Material Micro Manufacture, 2011, pp. 140-144.
[32]
H. Östmark, M. Nordberg and T. E. Carlsson, "Stand-off detection of explosives particles by multispectral imaging Raman spectroscopy," Applied Optics, vol. 50, no. 28, pp. 5592-5599, 2011.
[33]
P. Ekberg, "Ultra precision metrology : the key for mask lithography and manufacturing of high definition displays," Licentiate thesis Stockholm : KTH Royal Institute of Technology, Trita-IIP, 2011:04, 2011.
[34]
R. Su and L. Mattsson, "Depth profiling in alumina ceramic by optical coherence tomography," in Proceedings of the 7th International Conference on Multi-Material Micro Manufacture, 2010, pp. 316-319.
[35]
R. Lindqvist et al., "Equipp - Exchange of quality measurement process plans," in 10th International Symposium on Measurement and Quality Control 2010, ISMQC 2010, 2010, pp. 212-215.
[36]
R. Lindqvist et al., "Geometry assurance and quality control planning by QAM," in 10th International Symposium on Measurement and Quality Control 2010, ISMQC 2010, 2010, pp. 196-199.
[37]
P. Ekberg, L. Stiblert and L. Mattsson, "Ultra-precision geometrical measurement technique based on a statistical random phase clock combined with acoustic-optical deflection," Measurement science and technology, vol. 21, no. 12, pp. 125103, 2010.
[38]
N. H. Abramson, "Holodiagram : elliptic visualizing interferometry, relativity, and light-in-flight," Applied Optics, vol. 53, no. 11, pp. 2398-2404, 2014.
[39]
R. Su et al., "Enhancement of probing depth and measurement accuracy of optical coherence tomography for metrology of multi-layered ceramics," in 1st International Symposium on Optical Coherence Tomography for Non-Destructive Testing,13.-14.02.2013, Linz, Austria, 2013, pp. 71-73.
[40]
B. Daemi, P. Ekberg and L. Mattsson, "Performance Evaluation of Micro Milling Installations," in Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, 2013, pp. 213-216.
[41]
R. Su et al., "Accurate and automated image segmentation of 3D optical coherence tomography data suffering from low signal-to-noise levels," Journal of the Optical Society of America A, vol. 31, no. 12, pp. 2551-2560, 2014.
[42]
M. Kirillin et al., "Monte Carlo simulation in optical coherence tomography for quality inspection of materials," in 1st International Symposium on Optical Coherence Tomography for Non-Destructive Testing,13.-14.02.2013, Linz, Austria, 2013, pp. 65-67.
[43]
P. Olin et al., "Development of a Semicontinuous Spray Process for the Production of Superhydrophobic Coatings from Supercritical Carbon Dioxide Solutions," Industrial & Engineering Chemistry Research, vol. 54, no. 3, pp. 1059-1067, 2015.
[44]
Md.Masud-U. rashid and A. Archenti, "Manufacturing and Characterization of a Carbon-Based Amorphous (a-CNX) Coating Material," Nanomanufacturing and Metrology, vol. 1, no. 1, pp. 1-14, 2018.
[45]
H. Kari, F. Farahani and L. Mattsson, "Optical methods for fines and filler size characterization : Evaluation and comparison," Stockholm : Innventia AB, Innventia Report, 717, 2016.
[46]
K. Hyll, "Size and shape characterization of fines and fillers : a review," Nordic Pulp & Paper Research Journal, vol. 30, no. 3, pp. 466-487, 2015.
[47]
K. Hyll, "Image-based quantitative infrared analysis and microparticle characterisation for pulp and paper applications," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-IIP, 16:01, 2016.
[48]
K. Hyll, E. Björk and H. Vomhoff, "Flow imaging characterisation of morphological changes of chemical pulp due to refining," Nordic Pulp & Paper Research Journal, vol. 31, no. 3, pp. 411-421, 2016.
[49]
R. Su et al., "Three-dimensional metrology of embedded microfeatures in ceramics by infrared optical coherence tomography – advantages and limitations," in The Proceedings of the 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, 2015.
[50]
R. Tomkowski, The Barkhasuen Noise Measurements : Good Practice Guide. 1st ed. KTH Royal Institute of Technology, 2018.
Page responsible:infomaster@itm.kth.se
Belongs to: Department of Production Engineering
Last changed: Apr 20, 2020